A.    टेंपरिंग Tempering       
B.    सामान्यीकरण Normalising      
C.    कठोरण Hardening       
D.    पृष्‍ठ कठोरण Case hardening       
Answer - D
2.    एक स्लॉटर को एक प्रकार का ________ माना जा सकता है| A slotter can be considered to be a type of __________    
A.    क्षैतिज प्लेनर Horizontal planer       
B.    लंबवत शेपर Vertical shaper       
C.    लंबवत प्लेनर Vertical planer       
D.    क्षैतिज शेपर Horizontal shaper       
Answer - B">

  • English
  • Hindi

2021-01-09 18:54:05


Trade Important Question with Answer 2021-01-09 18:54:05

Important MCQ

1.    सायनाइडिंग" और "नाइट्राइडिंग" _______ के दो तरीके हैं| "Cyaniding" and "Nitriding" are two methods of ________.    
A.    टेंपरिंग Tempering       
B.    सामान्यीकरण Normalising      
C.    कठोरण Hardening       
D.    पृष्‍ठ कठोरण Case hardening       
Answer - D


2.    एक स्लॉटर को एक प्रकार का ________ माना जा सकता है| A slotter can be considered to be a type of __________    
A.    क्षैतिज प्लेनर Horizontal planer       
B.    लंबवत शेपर Vertical shaper       
C.    लंबवत प्लेनर Vertical planer       
D.    क्षैतिज शेपर Horizontal shaper       
Answer - B


3.    एक प्लेनर इस संदर्भ में शेपर से भिन्न होता है कि प्लेनर में:- A planer differs from the shaper in this respect that in the planer     
A.    औजार स्थिर रहता है और नमूना आगे-पीछे चलता है Tool is stationary and job reciprocates       
B.    औजार आगे-पीछे चलता है और नमूना स्थिर रहता है Tool reciprocates and job is stationary       
C.    औजार और नमूना दोनों आगे-पीछे चलते हैं Tool and job both reciprocate       
D.    इनमें से कोई नहीं None of these       
Answer - A


4.    अपने सबसे सादे रूप में, काँसा _______ की मिश्र धातु होता है| In its simplest form, bronze is an alloy of ____________.     
A.    तांबा और टिन Copper and tin     
B.    तांबा और जिंक Copper and zinc       
C.    तांबा, जिंक और निकल Copper, zinc and nickel       
D.    तांबा, टिन और लेड Copper, tin and lead       
Answer - A


5.    लोहे और ______ से जंग निर्मित होता है| Rust is formed from iron and __________.     
A.    सल्फर Sulphur       
B.    नाइट्रोजन Nitrogen       
C.    ऑक्सीजन Oxygen      
D.    हाइड्रोजन Hydrogen       
Answer - C


6.    बेलनाकार सतहों के प्रोफाइल को सही करने के लिए अपघर्षक स्टिक के साथ परिष्करण प्रक्रिया क्या है? What is the finishing process carried out with abrasive sticks to correct the profile of cylindrical surfaces? 
A.    लैपिंग Lapping    
B.    हॉनिंग Honing      
C.    ग्राईडिंग Grinding      
D.    फाइलिंग Filing      
Answer - B


7.    लैपिंग प्लेट की सतह पर खांचे क्यों प्रदान किए जाते हैं? Why grooves are provided on the surface of the laping plate?     
A.    विस्तार की अनुमति To allow expansion      
B.    निकासी प्रदान करने के लिए To provide clearance      
C.    घर्षण बनाए रखने के लिए To retain the abrasive      
D.    आशिंक समायोजन अनुमति देने के लिए To permit minor adjustment      
Answer - C


8.    व्हील के एब्रेसिव कणों का बॉण्ड की अपेक्षा जल्दी घिसने को क्या कहते हैं What is the rubbing of Wheel's ABREASI particles faster than Bond?    

A.    Glazing
B.    Loading    
C.    Dressing    
D.    Mounting    
Answer - A


9.    लाइव सैन्टर जॉब के साथ  With the live center jobs.
    
A.    Rotate    
B.    Do not rotate    
C.    Both A and B    
D.    None of these    
Answer - A


10.  
कार्यशाला में पुरानी बेकार पड़ी रेतियों को निम्न में से किस प्रक्रिया द्वारा इच्छित आकार का स्क्रैपर बनाया जा सकता है? In the workshop, which of the following process can be made by scrapers of the desired size.     

  1. स्क्रैपिंग Scrapping             
  2. फोर्जिग Forging  
  3. ड्रिलिंग Drilling    
  4. उपर्युक्त में से कोई नहीं None Of The Above             

Answer - B


11.    किस स्क्राइबर को वर्नियर हाइट गेज के साथ प्रयोग में लाया जाता हैं। Which scriber are used with the Vernier Heights Gauge.    

A.    Straight Scriber    
B.    Bent Scriber    
C.    Offset Scriber    
D.    All of these     
Answer - C


12.    स्पर गीयर का दबाव कोण कितना होता है What is the pressure angle of the spur gear    
A.    10°    
B.    14.5°    
C.    20°     
D.    50°    
Answer - B


13.    तेल का वह तापमान बिन्दु जिस पर तेल गाढ़ा होकर जमता नहीं है तथा बहता रहता है इसे कहते है The temperature of oil on which the oil thickens and does not accumulate and it keeps flowing. Says     
A.    फायर प्वाइंट Fire Point     
B.    ऑक्सीडशन Oxidation      
C.    फ़्लैश प्वाइंट Flash Point    
D.    पोर प्वाइंट Pour Point     
Answer - D


14.    ड्राइवर पुली व ड्रिवन पुली के घूमने के अनुपात को वेगानुपात कहते हैं। निम्न में से वेगानुपात का सही सूत्र क्या है The proportion of the rotation of driver pulley and pull pulley is called velocity. What is the correct formula for the velocity of the following    
A.    Dxn = dxn    
B.    dxN = Dxn    
C.    DxN = dxn    
D.    Dxd = Nxn    
Answer - C


15.    निम्न में से किस पुली को शाफ्ट पर कही भी आसानी से फिट किया जा सकता है Which of the following pulley can be easily fitted on the shaft    
A.    Solid Pulley    
B.    'V' Groove Pully    
C.    Split Pulley    
D.    Fast Pulley    
Answer - C

Anchor

Share Share
2143 Views

© 2018 IT Info Trade. All rights reserved || Terms & Conditions